Category Archive:Architecture

Closed

Multisynth-based Architecture

March 19th, 2017 / / categories: Architecture /
17

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

2

J2ME or also know as Java ME is a platform that is specifically designed for application development to run on mobile phones, PDAs and other embedded systems. J2ME development features an adaptable user interface, which integrates with network protocols and extends support for mobile application development. The mobile applications that are developed on J2ME can be also migrated across various different mobile devices. J2ME application developers create a variety of different mobile applications based on the customized requirements of the clients. They are experience in creating diverse mobile solutions and hence most clients prefer to outsource their mobile business applications to India.

J2ME Architecture and configuration
J2ME comprises of configurations and profiles that allow a developer to customize it for the Java Runtime Environment (JRE). The configuration defines the JVM used and the profile adds domain-specific classes to define the application.

Configurations: The configuration uses a set of core classes and a specific JVM to define the basic run-time environment. The configurations are of two types where one is called CLDC for handheld devices and the second one is CDC for plug-in devices. CLDC is has been developed for 16-bit or 32-bit small computing devices that have limited memory. CDC requires a 32-bit architecture and has at least 2 MB of memory and implements a functional JVM.

Profiles: A profile comprises of classes that allow J2ME application developers to execute features that are typically available on a group of small computing devices. The profiles used with CLDC are mobile information device profile (MIDP) and PDA profile (PDAP). The profiles used with CDC include Foundation Profile, Game Profile, Personal Profile, Personal Basis Profile and RMI Profile.

J2ME Architecture
The J2ME architecture consists of five layers and they are as follows:

MIDP: This is the topmost layer and consists of Java APIs. J2ME application developers use these APIs to create network connections, storage, and user interface. It also provides access to CLDC libraries and MIDP libraries.
J2ME APIs: This is the profile that comprises of a minimum set of application programming interfaces required for the small computing devices.
Configurations: This is responsible to manage the interactions between the JVM and the profile.
JVM
Operating System: This is the bottom layer.

3

A web sites architecture is what grounds all future search engine marketing efforts. An optimal web site architecture facilitates a search engine in traversing
and understanding the site. Therefore, creating a web site with a search engine optimized architecture is a major contributing factor in achieving and maintaining high search engine rankings.
Architecture should also be considered throughout a web sites lifetime by the web site developer, alongside other factors such as aesthetics and usability. If a new feature does not permit a search engine to
access the content, hinders it, or confuses it, the effects of good content may be reduced substantially.For example, a web site that uses Flash or AJAX technologies inappropriately may obscure the majority
of its content from a search engine.

Optimizing a sites architecture frequently involves tinkering with variables that also affect usability and the overall user perception of your site. When we encounter such situations, we alert you to why
these certain choices were made. Sometimes we find that SEO enhancements run counter to usability. Likewise, not all designs that are user friendly are search engine friendly. Either
way, a compromise must be struck to satisfy both kinds of visitors users and search engines.

One common misconception is that search engine optimization efforts can be made after a web site is launched. This is frequently incorrect. Whenever possible, a web site can and should be designed to be
search engine friendly as a fundamental concern.Unfortunately, when a preexisting web site is designed in a way that poses problems for search engines,search engine optimization can become a much larger task. If a web site has to be redesigned, or partially
redesigned, the migration process frequently necessitates special technical considerations. For example,old URLs must be properly redirected to new ones with similar relevant content.

Closed

Understanding the SaaS architecture

January 26th, 2017 / / categories: Architecture /
2

SaaS or software as a service is an innovative system of using software that has a remarkable advantage over the traditional use of software. In this system, the entire software is present in a web browser. You pay a subscription fee and can use this software. e.

In normal cases, you buy software with a lump sum and take out a license or ownership of it. Then you can use it for six months or a year. In this case, you will receive updates on the software only when the sales rep visits you in your office. Moreover, there is a time lag as you acquire the software and get it up and running.

Unlike this system, the SaaS enjoys several advantages. You can start using the software as soon as you pay the subscription. It is remotely accessed. So, there is no time lag. Moreover, the subscriptions are often paid monthly. So, if you do not like the services of a provider, you can change it next month. Updates are also pushed frequently so that you remain at the cutting edge. As long as you are not working with intellectual property or other data of a sensitive nature, SaaS can be highly beneficial to you. These services are best suitable for platforms which use industry standard workflows. You can pay on monthly basis, though a few services are priced per transaction.

Some of the important elements of the SaaS architecture are as follows:

A user case model that portray a typical scenario. It showcases the back end data exchange.
A conceptual architecture. It gives a long term prediction with an overall view of the various SaaS elements which are required for its implementation.
Finally, reference architecture can greatly enhance the utility of the SaaS architecture. It often comes as a template architecture which can easily be applied to specific problems.

One of the best software as a service platform is provided by IBM. You can try their private cloud for the best SaaS. This is an application where you can actually customize the cloud computing. The best in-class technology and security standards that are the hallmark of IBM are used for these private cloud applications. The SaaS architecture of IBM is efficient and functional and therefore suited to your needs.

The private cloud architecture is such that it vastly improves utilization, economics, storage as well as network. It includes such diverse and advanced elements like virtualized storage where workloads are consolidated into a single system, the system z cloud solution where you can build your customized solution for the platform of your choice. The PureApplication system is another proprietary system of IBM that forms one of the elements of public cloud infrastructure. S Kirti is a web enthusiast and a writer. Kirti has afforded her articles and write-ups autonomously and through various online forums.

Get more information on: saas architecture & public cloud infrastructure

Closed
5

Information technology is growing swiftly across the globe with new industrial requirements. There are many organizations that are categorized under IT industry. These organizations are combating to enhance the business performance and productivity. There are many business streams in IT industry such as marketing, banking, software and hardware resource development, IT services, management services and many more. These days, most of the organizations are implementing several business management services to enhance the organizational competency and performance. Enterprise architecture (EA) is one of them that help the organizations to increase the business. It is simply defined as the process of converting business methods and vision into an effective way by improving and communicating the models, key requirements, and principles of the existing business.

EA helps the business enterprises to understand the products and platform, strength and weakness and can also resolve several industrial issues. It can improve the business efficiency by delivering faster services. It can develop a relationship with business executives by translating the industrial needs and insights into strategies. These days, business is growing with raising requirements and requires some management services to control the business. It can also describe the organizational evolution by enhancing the business models and principles.

IT organizations are offering several openings for enterprise architecture jobs to enhance the business relationship between the clients and customers and to increase the growth. It has associated with the external environment including business processes and information technologies. The individuals, who work in this platform, are designated as enterprise architects. These architects support the organization by handling several business challenges and implementing the solutions to enhance the performance.

There are many frameworks in EA such as IAF, DoDAF, TOGAF, EAF and many more to provide multiple benefits to augment the organizational productivity. It is the main platform to connect entire business units in the industry. It is considered the best business factor due to its trends such as focus on diversification, breakdown of industry barriers, growing data density, prominence between growth and performance, rate of product innovation, personalized goods and services and many more to maintain the industrial standards. It is not only important in IT industry, but also in other industries such as banking, government sector, healthcare, telecommunications and many other sectors.

Get more information on: Enterprise Architecture Jobs & IT Service Desk Jobs

15

cademic architecture essay writing tasks would usually be performed by university students taking up undergraduate courses in architecture, architectural engineering, building services engineering, architectural technology, building design, other courses related to architecture and building design. The selection of engaging and good topics would be the first that the students would do if they were given the option of choosing their own topics for their architecture essays. If the students are having some difficulties in selecting particular topics for their architecture essays, an easy source where they could find good topics would be the general discussion of the discipline of architecture.

The general discussion of the discipline of architecture is arranged into several main headings with sub-headings under each main heading, and for the most part, each sub-heading would usually have smaller topics that are confined to a specific area of discussion. The student could either select a topic from the main heading or choose the specific areas of discussions that are under each sub-heading that would become the specific topic for his architecture essay.

Under the general discussion of architecture, the main headings and their respective sub-headings are: theory of architecture that includes historic written works on architecture and modern architectural concepts; history of architecture that includes ancient architecture, Asian architecture, Islamic architecture, Medieval architecture, Renaissance architecture, early modern and industrial age architectures, and contemporary architecture. In addition, some of the sub-headings are broken down into smaller areas from which he could select a specific topic.

A student performing regular or constant writing of architecture essays as part of his course requirements should take note that the essay structure of an architecture essay is similar to the basic structure of other academic essays, which consists of sections of the introduction, body and conclusion. Consequently, the student should follow the basic rules or steps in essay structuring that he studied and learned from the other essay writing tasks that he performed from his other academic subjects. The specific content in section of the essay on architecture would naturally be different compared to the specific content of other essays. But the style of writing the content for each section would be the same regardless of the specific subject area under the essay.

The university and college students who would research and write architecture essay should take note that some of the possible topics they would select for their architecture essays could also be applicable and relevant to use for their other academic essay writing tasks. For example, many of those students especially during their first year of studies could perform history essay writing tasks. Therefore, an example of history essays about the architecture related topics could include the architectural history, history of various architectural styles, architectural mythology, and the specific histories of the architectural styles of different civilisations.

20

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

2

Storytelling through Architecture

October 22nd, 2016 / / categories: Architecture /
16

By Marina Correa Photography: Philippe Ruault; courtesy the architects

The Giraffe Childcare Centre designed by Hondelatte Laporte Architects introduces a dollop of fantasy into the routine lives of suburban Parisian townsfolk-

Niched between a towering structure, next to a neighbourhood built in the 70s and a newly constructed area, it was imperative that the healthcare centre did not -get lost’ within the urban landscape – hence the building is composed of three tiers and each is identified by a unique concrete animal sculpture.

The facades of the building are made out of white corrugated iron that provides a minimal background to the animal sculptures.

Interestingly, each of the south-facing playgrounds is in continuity with the interior spaces; while the urban landscape is animated using a child’s imagination. The wild animal sculptures appropriate a space: a giraffe appears to be peacefully eating the leaves of the trees from the neighbouring park; a polar bear tries to clamber up the steps, while a family of ladybirds climbs the faade in an attempt to reach the interior patio.

Architecture turns into storytelling. The building changes its identity and becomes a landscape in its own right; a metaphor for the urban jungle. The animals and the trees link the building to nature and motion.

Besides infusing a playful and poetic element, this building has also been awarded a green, zero energy efficiency label, making it not just aesthetically appeasing but also one that respects its environment.

Becoming a prominent landmark for the nursery, the affable animal forms transport us to a make-believe world. When pondered upon, definitely a project that goes way beyond the surface to attribute human characteristics and ethos to the emotional, functional routine of a child daycare centre.

to view images click on globalhop.indiaartndesign.com

Closed

Architecture Of Yesteryears

October 20th, 2016 / / categories: Architecture /
13

Shingle style architecture is an innovative form of Queen Anne and it was originated in America during the last two decades of 19th century.This name was given by Vincent Scully, a historian of building architecture.Among the various structures in America that are constructed in this style, The Hotel del Coronado in San Diego is considered as the biggest.The houses that are built in this style are horizontal structures built up on a stone laid foundation.The asymmetrical designs and irregular construction make the building process highly complicated and as a result the cost of construction was far beyond the affordable range for common people.Thus it was considered as a luxury homes design. The roofs are more complex in this type of architecture. Many of such houses have gabled roofs with a tower in the front. A few houses have roofs that are hipped. In the gambrel form of roofs, the third storey of the building will be hidden in the roof so that the building will appear as a two storeyed building. The roof shingles and wall shingles will be in different colors. Most of the houses have towers and if a building is without tower, a part of its wall will be bulged out.

This type of architecture has the provision for more numbers of big and small windows. The windows are mostly double-hung with a single sash below and multiple sashes above. For huge walls, the windows will be in 2, 3 or more rows and there are various designs for the windows. In the most complex designs, large windows are kept in bays with 1, 2 or 3 stories. The more stylish windows will be in square, rectangular or circular shapes.Entrance with spacious porch is characteristic of this architecture.People used to relax in the porches which are supported by balusters, columns or stone supports.

The modern houses that are built in Shingle style architecture offer a host of distinctive features including natural surroundings, energy efficiency and healthy indoor atmosphere. These houses demonstrate how wood, stone and sunlight can be utilized to provide a healthy shelter.There are many holiday homes that are built in this style of architecture. Many wealthy people have constructed this type of homes at famous resorts and also at sea-side plots. Natural colors, exterior covered by wooden shingles and an asymmetric structure are the basic features of this architectural form. The other common features are big porches, irregular roofs, towers, verandas, asymmetric floors, chimneys, huge staircases and fireplaces etc.

Are you looking for Shingle style architects and luxury vacation homes, vanbrouck is the best choice. It is highly recommended from both a design and value standpoint when we were looking to home designs and build our dream home. For more information about Shingle style architecture please visit us.

Closed
10

As we know rendering technology of render farm used in deferent entertainment areas such as movie, animation, games etc. Rendering technology also used in building architecture industry. Rendering technology used in architecture industry known as 3d architecture rendering. Render farms are able to provide 3d software to complete a big architecture project easily and perfectly. By using rendering technology private owners can get a design to prepare the dream home at small charge. It is possible to watch real life look of the future building in the design created by a render farm, which is also called cloud render farm using 3d rendering technology.3d rendering technology help architects to build architectural models with perfect scales and dimensions. Rendering technology also used by architects or property owners to decide colors and materials perfect for their architecture. Most of the architects use cad software for 3d architecture rendering. Architects can also use 3ds Max, Revit, Archi CAD software for 3d architecture rendering. Architecture rendering provide designers and architects a clear concept about their task. They can avoid any kind of unwanted interruption and save a lot of time during architecture process. 3d architecture rendering is very popular in architecture industry for its various advantages such as this technology can produce a great efficiency during architecture development, little deference between design and bodily realization, designers or architects can visualize the development earlier to its architecture and it also increase trust in their design.3d architecture rendering have some sorts in architecture industry like 3d interior rendering, 3d exterior rendering, 3d product rendering etc. to complete a big architecture project rendering technology is the first thing essential for a property owner because it produce trust in a design through virtual visualization to modify before the architecture begins in the real world. So after all we can say that 3d architecture rendering is very essential innovation for architecture industry to build up architecture precisely with strong architectural design.